White Sublimatable Bag with 3 1/2" Gusset 8" x 10" sublimation blank

White Sublimatable Bag with 3 1/2" Gusset 8" x 10" sublimation blank

Regular price $3.49
Shipping calculated at checkout.

Short Description:
 8" x 10" White Sublimatable Bag with 3 1/2" Gusset

Long Description:
 Look fashionable while saving the planet. Tote bags are great to reuse for groceries, gifts and more! Made with recycled polyethylene which is recycled plastic bottles. Reusable



 3 1/2"


Overall Size:
 8"(L) x 10"(H) x 3 1/2"(W) x 1/64" thick

Maximum Personalization Area:
 8"(L) x 10"(H) on both sides


 Canvas/Poly blend


Number of Batteries Required:

Miscellaneous Dimensions:
 Handles: 13"(L)

Misc. Notes
Bag has a gusset, so is expandable.
Made with recycled polyethylene terephthalate (also known as PET or PETE).
PET (or PETE) is made from recycled plastic bottles.
Diamond Drag Engravable:


Rotary Engravable:



Sand Carvable:

Front Engravable:

Reverse Engravable:

Indoor Use Only:

Double Sided:

Has Easel Back:

Includes Sawtooth For Hanging:

Back is KeyHoled:

Self Standing:

Includes Pins:

Includes Batteries:

    Supplies needed:
    - sublimatable substrate (bag)
    - sublimation transfer
    - teflon or scratch paper
    - repositionable spray or heat tape

    Heat press settings:
    - temperature - 400 degrees F
    - dwell time - 1:00 to 1:15 minutes
    - pressure - medium to heavy (firm)

    Note: The recommended settings above may need adjustments for best results.
    Settings will vary depending on the heat press brand and model ink and paper
    and atmospheric conditions.

    2nd Note: To adhere the transfer to the substrate use repositionable spray
    on the transfer instead or in addition to heat tape.

    3rd Note: Placing a piece of scratch paper or teflon sheet inside the bag
    prevents bleed through (ink migrating to the other side of the product).

    Layer the press from the bottom pad to the top heat platen as follows:
    1. teflon sheet or scratch paper
    2. substrate with scratch paper or teflon inside
    3. transfer
    4. teflon sheet or scratch paper

    1. Place a piece of paper or teflon roughly the same size as the bag inside
    the bag to prevent bleed through.
    2. Spray the transfer with repositionable spray (additional heat tape can be
    used as well).
    3. Position the substrate onto the transfer.
    4. Place the transfer and substrate in the press (transfer on top of
    5. Place the teflon sheet or scratch paper over the substrate and transfer.
    6. Press the items using the settings listed above.
    7. Remove the transfer from the substrate and items from the press
    immediately. Use heat resistant gloves if necessary - the items will be very

    - If the image of the final product appears light increase the pressure or
    the dwell time slightly (10-20 seconds).
    - If the image on the final product appears blurred or substrate appears
    yellowed reduce the dwell time slightly (10-20 seconds).
    - When sublimating a double-sided substrate sublimate one side allow to
    cool and then sublimate the other side. Use a fresh teflon or scratch paper
    under the substrate to eliminate any degassing of the first image onto the
    press or teflon.