100ML CYMK Sublimation Ink Bottle Refills for Epson Printers. Can be sold in a set of 4 or individually. Set includes 1 100ml cyan ink bottle, 1 100ml magenta ink bottle, 1 100ml yellow ink bottle, and 1 100ml black ink bottle. Compatible with the following Epson Printers: Epson Workforce 3620, 3640, 7110, 7210, 7620, 7710, 7720 and all Ecotank Printers.
100ML CMYK Sublimation Ink Bottle Refills For Sawgrass Printers
100ML CYMK Sublimation Ink Bottle Refills for Epson Printers. Can be sold in a set of 4 or individually. Set includes 1 100ml cyan ink bottle, 1 100ml magenta ink bottle, 1 100ml yellow ink bottle, and 1 100ml black ink bottle. Compatible with Sawgrass printers.
Temperature: 400F Time: 30-45 secs Pressure: Medium Print image in reverse Place in heat press with transfer on top Press according to above time/temperature/pressure After pressing, remove paper immediately.
Size: 8.0" x 11.0"
Gloss white sublimation surface
For sublimation only
12oz Straight Tumblers Sublimation Dual Lids Sippy Cups With pacifier & normal lid Baby Blank Water Bottle Handle Double Wall Vacuum Insulated Kids Drinkware
Supplies needed: - sublimatable substrate (patch) - sublimation transfer - teflon or scratch paper - heat tape - scratch paper
Heat press settings: - temperature - 390 degrees F - dwell time - 60 seconds - pressure - medium
Note: The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
2nd Note: To adhere the transfer to the substrate use heat tape not repositionable spray. Using the spray can cause the transfer to stick to the substrate.
Layer the press from the bottom pad to the top heat platen as follows: 1. teflon sheet or scratch paper 2. substrate (patch) 3. transfer 4. teflon sheet or scratch paper
Steps: 1. Position the patch onto the transfer. 2. Tape the patch to the paper. Only tape the edges to prevent the tape from sticking to the adhesive backing. 3. Place the transfer and substrate in the press onto scratch paper or teflon (transfer on top of substrate). 4. Place the teflon sheet or scratch paper over the patch and transfer. 5. Press the items using the settings listed above. 6. Remove the transfer from the substrate and items from the press immediately. Use heat resistant gloves if necessary - the items will be very hot.
Tips: - If the image of the final product appears light increase the pressure or the dwell time slightly (10-20 seconds). - If the image on the final product appears blurred or substrate appears yellowed reduce the dwell time slightly (10-20 seconds).
ATTACHING THE PATCH TO FABRIC
BEFORE ATTACHING THE PATCH BE SURE TO LET IT REST FOR A LEAST ONE HOUR AFTER SUBLIMATION TO ALLOW THE ADHESIVE TO RECONSTITUTE.
-Attaching With a heat press - 300 degrees for 15 seconds - press from the front side of patch -Attaching With a household iron - 300 degrees (wool setting) for 15 seconds - press from the back side of the fabric.
Patches can be dry cleaned or washed in a washing machine with cold water - air dry.
Flexible, durable, plastic squeegee. Use for smoothing out vinyl and removing bubbles. You can use this squeegee to apply your transfer tape, and then to help adhere the vinyl to the final surface. Also know as a hand applicator, or hand jobber.
Temperature: 400F Time: 30-45 secs Pressure: Medium Print image in reverse Check for protective film before pressing Place in heat press with transfer on top Press according to above time/temperature/pressure After pressing, remove paper immediately.
Sublimation Blankets with 9 panels for customizing. Material: Polyester, Color: Black /White, Size: 40*30 inches, “Throw Blanket” WITH NO FRINGE
9 panel sublimation flannel blanket photo blanket
Sublimation Paper is HERE HOV+Sub
HOV+Sub paper revolutionizes paper performance, enabling you to print complex images and achieve stunning photographic quality results. HOV+Sub allows for ink savings of up to 40% and transfer time reduction of up to 50% compared to competing papers.